Lynx 33809 Short Trident Burner Support for 27" & 36" Grills
Product Description
The short Trident burner depends on the correct support geometry to remain properly positioned in the firebox. Lynx part 33809 supports and aligns the compatible short Trident infrared burner in the firebox.
A new bracket may fix the burner position without replacing a good burner. The bracket shape must match the burner so the parts sit in the right place.
Key Features
- Returns the burner to its intended position inside the firebox.
- Provides a focused repair when the burner remains usable.
- Matches the support geometry required by the original burner design.
Compatible Applications
Applicable 27" and 36" Lynx grills equipped with the short Trident ProSear2 burner.
Production series: No broader series-wide interchangeability is confirmed; verify the complete model and original configuration.
Fitment and Ordering Notes
Find the model and serial label before you order Lynx part 33809. Check the model, production series, and old part. Do not confuse this part with support 33405 used with the longer Trident burner in 30-inch, 42-inch, and 54-inch grills. A similar look, grill width, or size does not prove that the part will fit.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Lynx |
| Part Number | 33809 |
| Product Type | Short Trident ProSear2 burner support / mounting bracket |
| Package Contents | 1 burner-support bracket |
Frequently Asked Questions
Where can I find my Lynx model and production series?
Check the rating label for the full model and serial number. The label may be near the control panel, cabinet, or grill body. Check the owner's manual if you cannot find it.
When does a burner support or hanger need replacement?
Replace it if rust, cracks, bends, or damaged mounts keep the burner from sitting safely in place.
Can the old fasteners be reused?
Only reuse them if the service guide allows it and they are not damaged. Replace rusty or stripped hardware with the correct part.
What should I check after the burner is installed?
Make sure the burner is seated and lined up. Reconnect each part as directed. Leak-test any gas connection that was moved.