Lynx 33405 Long Trident Burner Support for 30", 42" & 54" Grills
Product Description
The long Trident burner requires its matching support to remain level and correctly aligned beneath the cooking surface. Lynx part 33405 supports and aligns the compatible long Trident infrared burner in the firebox.
A new bracket may fix the burner position without replacing a good burner. The bracket shape must match the burner so the parts sit in the right place.
Key Features
- Returns the burner to its intended position inside the firebox.
- Provides a focused repair when the burner remains usable.
- Matches the support geometry required by the original burner design.
Compatible Applications
Applicable 30", 42", and 54" Lynx grills equipped with the long Trident ProSear2 burner.
Production series: No broader series-wide interchangeability is confirmed; verify the complete model and original configuration.
Fitment and Ordering Notes
Find the model and serial label before you order Lynx part 33405. Check the model, production series, and old part. Do not confuse this part with support 33809 used with the short Trident burner in applicable 27-inch and 36-inch grills. A similar look, grill width, or size does not prove that the part will fit.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Lynx |
| Part Number | 33405 |
| Product Type | Long Trident ProSear2 burner support / mounting bracket |
| Package Contents | 1 burner-support bracket |
| Listed Overall Length | approximately 11" (279 mm) |
Frequently Asked Questions
Where can I find my Lynx model and production series?
Check the rating label for the full model and serial number. The label may be near the control panel, cabinet, or grill body. Check the owner's manual if you cannot find it.
When does a burner support or hanger need replacement?
Replace it if rust, cracks, bends, or damaged mounts keep the burner from sitting safely in place.
Can the old fasteners be reused?
Only reuse them if the service guide allows it and they are not damaged. Replace rusty or stripped hardware with the correct part.
What should I check after the burner is installed?
Make sure the burner is seated and lined up. Reconnect each part as directed. Leak-test any gas connection that was moved.