Real Fyre G31 Three-Tiered Burner System - Natural Gas Only

$1,227.52

Real Fyre - RHP SKU: G31-18/20 Barcode: 619655168494

Available Now!

Real Fyre G31 match-lit, three-tiered vented burner system for natural gas fireplaces. Available as G31-18/20, G31-24/30, and G31-33/39, supplied without a valve. Gas logs are sold separately.

Product Size: 18/20" Match Lit Burner W/O Valve (NG Only)

Add $199.00 more for FREE shipping!
Description Features Specs Shipping/Returns Legal Disclaimers & Warnings

Real Fyre G31 Match-Lit Burner for Vented Fireplaces

Product Description

The Real Fyre G31 creates a fire across three burner levels, with flames above the logs and a glowing ember bed below. This match-lit version suits a fireplace where you want to light the burner by hand rather than use a pilot or remote-control system.

Available Models

  • G31-18/20
  • G31-24/30
  • G31-33/39

Fitment and Ordering Notes

These models use natural gas only and cannot be field-converted to another fuel. They are supplied without a valve, and the gas log set is purchased separately.

Choose an approved Real Fyre log set and check the fireplace requirements for that specific burner and log-size combination. A larger log set can require a wider fireplace even when it uses the same burner.

Installation and service must be performed by a qualified professional. This system is for a solid-fuel-burning fireplace with a working flue. The chimney damper and any glass doors must be fully open during operation. Do not burn wood in the fireplace with this system installed.

Frequently Asked Questions

Can I add extra embers or use the embers supplied with my logs?

Use only the embers supplied with the burner system. The manufacturer directs installers to discard embers packaged with the log set and warns that adding extra embers can cause unsafe operation. Lava granules and lava coals belong on the fireplace floor around the front and sides, not on or behind the burner.

See the Specs tab for fireplace dimensions, gas requirements, installation notes, and the official manual.

  • Flame height can be adjusted using the fireplace’s key valve.
  • Multiple control options
  • Burner increases the intensity of the fire and the glow of the logs
  • Compatible with other gas logs from the Real Fyre Vented collection

Technical Specifications

  • Brand: Real Fyre
  • Models: G31-18/20, G31-24/30, and G31-33/39
  • System Type: Three-tiered vented decorative gas burner
  • Fuel: Natural gas only
  • Ignition: Manually lighted, match-lit
  • Valve: Not included
  • Logs: Purchased and packaged separately
  • G31-18/20 Input: 55,000 BTU/hr
  • G31-24/30 Input: 65,000 BTU/hr
  • G31-33/39 Input: 85,000 BTU/hr
  • Rating Elevation: Listed input ratings apply up to 2,000 feet. Consult the manufacturer before installation at higher elevations.
  • Minimum Inlet Pressure: 7" water column
  • Maximum Inlet Pressure: 10.5" water column
  • G31-18/20 Minimum Fireplace, 18" Logs: 23" front width, 14" rear width, 16" depth, and 17" height
  • G31-24/30 Minimum Fireplace, 24" Logs: 29" front width, 17" rear width, 16" depth, and 17" height
  • G31-24/30 Minimum Fireplace, 30" Logs: 32" front width, 17" rear width, 16" depth, and 17" height
  • G31-33/39 Minimum Fireplace, 33" Logs: 34" front width, 23" rear width, 16" depth, and 17" height
  • G31-33/39 Minimum Fireplace, 39" Logs: 41" front width, 23" rear width, 16" depth, and 17" height
  • Fireplace Measurement Notes: Rear width is measured at the required depth. Where an ash lip exists, measure depth from inside the lip. These are minimum fireplace dimensions, not burner or shipping dimensions.
  • Maximum Fireplace Ash Lip or Recess: 3/4"
  • Minimum Chimney Height: 15 feet from the hearth to the top of the chimney
  • Damper Venting: Permanent opening requirements vary by chimney height, fireplace construction, and burner size. Use the model-specific chart on page 6 of the manual. The damper must be fully open during operation.
  • Supplied Connection Hardware: One 24" flex connector with adapters and one damper clamp
  • Supplied Decorative Media: Lava granules, lava coals, glowing embers, and Bryte Coals
  • Glowing Ember Packages: One EM-4 for G31-18/20. Two EM-4 for G31-24/30 and G31-33/39.
  • Bryte Coal Packages: One EM-11 for G31-18/20 and G31-24/30. Two EM-11 for G31-33/39.
  • G31-33/39 Log Locators: Two locators with hardware, used when required by the selected log set’s placement instructions
  • Field Fuel Conversion: Not permitted

Installation Notes

Installation and repair must be performed by an NFI Certified or other qualified professional installer. The following summarizes the manufacturer’s sequence and does not replace the complete manual.

  • Have the chimney flue, damper, and firebox cleaned and inspected. Confirm the fireplace floor is level and smooth, and verify the fireplace dimensions, gas type, supply pressure, and required ventilation.
  • Permanently install the supplied damper clamp. If it cannot provide the required permanent opening, have the damper modified as directed in the manual.
  • Turn off the fireplace gas supply. Remove the supply-stub cap without allowing the stub to turn or loosen its connection inside the wall.
  • Attach the small flex-connector adapter to the burner’s underside nipple using the specified gas-resistant pipe compound. Secure the flex connector to the adapter.
  • Center the burner from left to right in the fireplace. Keep the porcelainized front panel clean.
  • With the gas still off, attach the larger adapter to the supply stub, then connect the flex connector. Tighten the connections securely.
  • Have the installer perform the manual’s leak-test procedure using an appropriate soapy-water solution. Never use a flame to check for leaks. Turn the gas off before continuing.
  • Spread the supplied lava granules around the front and sides of the burner, then add the lava coals over them. Do not place lava media on or behind the burner.
  • For G31-33/39, install the log locators only when required by the selected log set’s instructions.
  • Position the logs, glowing embers, and Bryte Coals using the correct illustrated sequence. MCO/MCS sets and the other listed log families use different placement instructions. Keep the flash tube clear, leave the reflective panel uncovered, and do not add extra embers.
  • Complete log placement using the instructions for the specific log set. Use a fireplace screen during operation, keep glass doors fully open, and never leave the burner operating unattended.

Manuals and Documentation

Real Fyre G31 Match-Lit Installation & Owner’s Manual, L-A2-357

Pick the right gas log system

Barbecue Parts Depot – Shipping Policy

Free Shipping Threshold: Orders of $199 or more qualify for free standard shipping.
Flat‑Rate Shipping for Smaller Orders: Standard ground shipping is charged according to the order value:

Price Shipping Cost
$1–$49.99 $13.99
$50–$99.99 $18.99
$100–$149.99 $24.99
150–$198.99 $32.99

Eligibility: Free shipping applies to qualifying orders delivered to addresses within the lower 48 states. Orders below the threshold ship using the flat rates above.

Additional Information: Actual shipping charges may vary for oversized items or remote destinations; see the full shipping policy on Barbecue Parts Depot’s website by clicking "here"

Barbecue Parts Depot – Returns Policy

Return Authorization Required: Contact Customer Service at **1‑888‑528‑0885** to obtain a Return Authorization (RA) number before sending any items back. Packages shipped without an RA may be refused.

Return Address: Ship all approved returns to Barbecue Parts Depot, 1802 Chico Ave, Suite B, South El Monte, CA 91733.

Condition of Returns: Items must be properly packaged to prevent damage. If a product is returned damaged or appears used, the return may be refused and the item shipped back to you at your expense.

Refunds & Restocking Fee: After inspection, refunds are issued to the original payment method. Parts returned in their original manufacturer’s box with all paperwork are not subject to a restocking fee. Returns in other packaging or missing items incur a 15 % restocking fee, deducted from the refund.

Impact of Free Shipping: If you return items from an order that qualified for free shipping, the original shipping cost will be deducted from your refund along with any applicable restocking fees.

Defective, Damaged or Missing Parts: Inspect your order upon delivery and notify Customer Service of any damage, defects or missing parts within 2 days; photos may be required. After the second day, items cannot be reported as damaged or returned for exchange/refund.

Electrical Parts: Returns on electrical components (motors, switches, wiring, lights, etc.) are accepted only within 7 days of delivery, provided they are unused and in their original packaging. After 7 days these parts are non‑returnable; warranty claims must be filed directly with the manufacturer.

Please review our full Return Policy for more details.

The content on our site is intended to be used for customer information only. Please read all manuals and documentation (i.e. Product packaging, owners’ manuals, installation instructions, and/or operating instructions) pertaining to your purchase before installing or using the purchased product, as it may include more detailed information than what is shown on our website.

WARNING for California residents: this product may contain chemical(s) classified by the state of California to cause birth defects, cancer, or other reproductive harm. For More Information visit www.p65warnings.ca.gov