Automatic Safety Pilot Kit - APK-10
Product Description
The Real Fyre APK-10 is an automatic safety pilot assembly designed for gas hearth and fire feature systems that call for a standing pilot and basic on/off control. This kit uses a continuous (standing) pilot for reliable ignition and includes an RR-1A on/off remote set, allowing the system to be started and shut down from inside the room.
The APK-10 is configured for natural gas and includes a propane orifice for conversion when the appliance setup requires LP.
At-a-Glance
| Brand | Real Fyre |
| Model | APK-10 |
| Control Type | On/Off remote control (RR-1A) |
| Pilot Type | Standing pilot |
| Fuel Compatibility | Natural gas (LP conversion orifice included) |
Key Features
- On/off-only control for straightforward operation with the included RR-1A remote set.
- Standing pilot design supports consistent ignition behavior in systems specified for a continuous pilot.
- Configured for natural gas with an included propane orifice for conversion when required by the installation.
- Optional WS-1 wall switch kit available for hardwired on/off control (includes 15-foot harness and rocker switch).
Why Buy
Choose the APK-10 when you want a basic on/off control format, and your project calls for an automatic safety pilot with a standing pilot. It is a practical fit for installations where simple remote start/stop is preferred over variable flame control, and it supports either NG or LP setups when the appliance configuration allows conversion.
Expert Installation & Performance Notes
For island planning or fireplace planning, confirm your burner, log set, or fire feature system specifically calls for an APK-series safety pilot and verify the required fuel type before ordering. A standing pilot is designed to remain lit during the season, so plan for standard pilot use and follow the manufacturer’s lighting and shutdown procedures.
Fuel conversion should only be performed when the appliance and local code allow it, and a qualified installer should complete it. After installation, leak testing and a full safety check are essential before operation. If you want a wall-mounted control point instead of a handheld remote, plan for routing the optional WS-1 harness path before finishing surfaces.
Semantic FAQ
Q: What type of control does the APK-10 provide?
A: It is an on/off-only system and includes an RR-1A remote transmitter and receiver for basic start and shutdown.
Q: Does the APK-10 use a standing pilot or an intermittent pilot?
A: The APK-10 uses a standing (continuous) pilot.
Q: Is the APK-10 natural gas or propane?
A: It is ready for natural gas and includes an orifice intended for conversion to propane when required by the installation.
Q: Can I use a wall switch instead of the remote?
A: Yes. An optional WS-1 wall switch kit is available and includes a 15-foot wire harness and a rocker switch for on/off operation.
Q: Will this work with any gas log set or burner?
A: Use it only with systems that specify a compatible automatic safety pilot kit. Confirm compatibility with the appliance documentation before purchase.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Real Fyre |
| Model | APK-10 |
| System Type | Automatic safety pilot kit |
| Pilot Type | Standing pilot |
| Control Included | RR-1A on/off remote transmitter and receiver |
| Fuel Type | Natural gas (LP conversion orifice included) |
| Maximum Input | Up to 230,000 BTU |
| Optional Control | WS-1 wall switch kit (15-foot wire harness and rocker switch) |
- Important: For your safety, any assembly of gas components should be done by a licensed professional contractor
